HFFR Polyolefin Sheathing Compound for Wire & Cable These compounds are engineered to enhance flame retardant property with MDH based on polyolefin for sheath of power cable. It doesn’t emit toxic gases as well as halogen components and show excellent low smoke property. Also, it is designed to show well-balanced flame retardant, mechanical and processing properties. APPLICATION IEC 60502 ST8 BS 7655 : 6.1 types LTS1 & LTS3 & LTS4 Power cable sheath & insulation Optical fiber cable sheath PROPERTY PROCESSING It is recommended that this product can be extruded on any conventional extruder equipped with a PE/PVC, 3 stage or barrier type screw having an L/D ratio of 20~24 : 1 and a compression ratio of 2.5~3 : 1 Prior to processing, We recommend that this product is dried at 70~80°C during 3 hours to remove moisture. STORAGE & HANDLING Should be stored at room temperature between 10~30°C. Maximum storage period in dry and clean place is 6 months unopened and in original packaging. If it has been stored in an opened condition for a long time, use it after drying for 3~4 hrs at 70~80°C. in a dehumidifying dryer. To ensure health and safety, Material Safety Data Sheets (MSDS) are available on request. PACKING 600kg Reinforced Carton Box with inner aluminum liner 25kg Paper bag with inner aluminum liner CUSTOMIZING Special compounds can be developed to meet customers specification and requirements.

HFFR Polyolefin Sheathing Compound for Wire & Cable These compounds are engineered to enhance flame retardant property with MDH based on polyolefin for sheath of power cable. It doesn’t emit toxic gases as well as halogen components and show excellent low smoke property. Also, it is designed to show well-balanced flame retardant, mechanical and processing properties. APPLICATION BS 7655 :6.1 types LTS1 & LTS3 & LTS4 Power cable sheath & insulation Optical fiber cable sheath PROPERTY PROCESSING It is recommended that this product can be extruded on any conventional extruder equipped with a PE/PVC, 3 stage or barrier type screw having an L/D ratio of 20~24 : 1 and a compression ratio of 2.5~3 : 1 Prior to processing, We recommend that this product is dried at 70~80°C during 3 hours to remove moisture. STORAGE & HANDLING Should be stored at room temperature between 10~30°C. Maximum storage period in dry and clean place is 6 months unopened and in original packaging. If it has been stored in an opened condition for a long time, use it after drying for 3~4 hrs at 70~80°C. in a dehumidifying dryer. To ensure health and safety, Material Safety Data Sheets (MSDS) are available on request. PACKING 600kg Reinforced Carton Box with inner aluminum liner 25kg Paper bag with inner aluminum liner CUSTOMIZING Special compounds can be developed to meet customers specification and requirements.

HFFR Polyolefin Sheathing Compound for Wire & Cable These compounds are engineered to enhance flame retardant property with ATH based on polyolefin for sheath of power cable. It doesn’t emit toxic gases as well as halogen components and show excellent low smoke property. Also, it is designed to show well-balanced flame retardant, mechanical and processing properties. APPLICATION IEC 60092-359 type SHF-1 UTP & Telecom Cable Sheath PROPERTY PROCESSING It is recommended that this product can be extruded on any conventional extruder equipped with a PE/PVC. 3 stage or barrier type screw having an L/D ratio of 20~24 : 1 and a compression ratio of 1.2~1.8 : 1 STORAGE & HANDLING Should be stored at room temperature between 10~30°C Maximum storage period in dry and clean place is 6 months unopened and in original packaging. If it has been stored in an opened condition for a long time, use it after drying for 3~4 hrs at 65~70°C in a dehumidifying dryer. To ensure health and safety, Material Safety Data Sheets (MSDS) are available on request. PACKING 600kg Reinforced Carton Box with inner aluminum liner 25kg Paper bag with inner aluminum liner CUSTOMIZING Special compounds can be developed to meet customers specification and requirements.

HFFR Polyolefin Sheathing Compound for Wire & Cable These compounds are engineered to enhance flame retardant property with MDH based on polyolefin for sheath of power cable. It doesn’t emit toxic gases as well as halogen components and show excellent low smoke property. Also, it is designed to show well-balanced flame retardant, mechanical and processing properties.  APPLICATION Power Cable Sheath Medium Voltage Power Cable Extra High Voltage Power Cable PROPERTY PROCESSING It is recommended that this product can be extruded on any conventional extruder equipped with a PE/PVC, 3 stage or barrier type having an L/D ratio of 20~24 : 1 and a compression ratio of 1.2~1.8 : 1 Prior to processing, we recommend that this product is dried at 70~80°C during 3 hours to remove moisture. STORAGE & HANDLING Should be stored at room temperature between 10~30°C. Maximum storage period in dry and clean place is 6 months unopened and in original packaging. If it has been stored in an opened condition for a long time, use it after drying for 3~4 hrs at 70~80°C in a dehumidifying dryer. To ensure health and safety, Material Safety Data Sheets (MSDS) are available on request. PACKING 600kg Reinforced Carton Box with inner aluminum liner 25kg Paper bag with inner aluminum liner CUSTOMIZING Special compounds can be developed to meet customers specification and requirements.